Home > Logic Output Optoisolators >

Intelligent power module interface optocoupler KTP HCPL-M456-C5H0 for inverter efficiency improvement

Product Categories

Digital Isolators [228]
Isolators - Gate Drivers [194]
Logic Output Optoisolators [243]
Transistor, Photovoltaic Output Optoisolators [647]
Special Purpose Isolators [2]
Triac, SCR Output Optoisolators [463]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Intelligent power module interface optocoupler KTP HCPL-M456-C5H0 for inverter efficiency improvement

Power Dissipation : 145mW

Load Voltage : 30V

Output Current : 15mA

Low Level Delay Time : 550ns

High Level Delay Time : 400ns

Reverse Voltage : 5V

Current transfer ratio : 44%

Voltage - Forward(Vf) : 1.5V

Voltage - Supply : 4.5V~30V

Forward Current(If) : 25mA

Operating Temperature : -40℃~+100℃

CMTI(kV/us) : 30kV/us

Number of Channels : 1

Input threshold current : 5mA

Isolation Voltage(Vrms) : 3.75kV

Input Type : DC

Description : 30V 15mA 5V 1.5V 4.5V~30V DC SO-5 Logic Output Optoisolators RoHS

Mfr. Part # : HCPL-M456-C5H0

Model Number : HCPL-M456-C5H0

Package : SO-5

Contact Now

HCPL-M456 Intelligent Power Module Interface Optocoupler

The HCPL-M456 is an intelligent power module interface optocoupler that uses a GaAsP LED optically coupled to a high-gain photodetector. Its minimal propagation delay difference makes it ideal for improving inverter efficiency by reducing switching dead-time in general IPM applications. It operates within an industrial temperature range of -40C to 100C.

Product Attributes

Brand: KTP Semiconductor
Model: HCPL-M456
Origin: Derived from URL (ktp-semi.com)

Technical Specifications

Parameter	Symbol	Min	Typical	Max	Unit	Test Condition
Electrical Characteristics (Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.)
Current Transfer Ratio	CTR	44	90	%	IF=10mA, VO=0.6V
Low Level Output Current	IOL	4.4	9.0	mA	IF=10mA, VO=0.6V
Low Level Output Voltage	VOL	0.3	0.6	V	IO=2.4mA
Input Threshold Current	ITH	1.5	5.0	mA	VO=0.8V, IO=0.75mA
High Level Output Current	IOH	5	50	uA	VF=0.8V
High Level Supply Current	ICCH	0.6	1.3	mA	VF=0.8V, VO=Open
Low Level Supply Current	ICCL	0.6	1.3	mA	IF=10mA, VO=Open
Input Forward Voltage	VF	1.5	1.8	V	IF=10mA
Forward Voltage Temp. Coefficient	VF/TA	-1.6		mV/	IF=10mA
Input Breakdown Voltage	BVR	5		V	IR=10uA
Input Capacitance	CIN	60		pF	f=1MHz, VF=0V
Switching Characteristics (RL=20K, Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.)
Low Level Output Delay Time	tPHL	30	200	400	ns	CL=100pF
High Level Output Delay Time	tPLH	130	270	550	ns	CL=100pF
Pulse Width Distortion	PWD	200	450	ns
Propagation Delay Difference (Any two paths)	tPLH-tPHL	-150	200	450	ns	CL=100pF
High Level Output Common Mode Transient Rejection	CMH	15	30	kV/us	IF=0mA, VO3.0V
Low Level Output Common Mode Transient Rejection	CML	15	30	kV/us	IF=10mA, VO1.0V
Package Characteristics
Input-Output Isolation Breakdown Voltage	VISO	3750		Vrms	RH<50%, t=1min, TA=25C
Input-Output Resistance	RI-O	10¹²			VI-O=500Vdc
Input-Output Capacitance	CI-O	0.6		pF	f=1MHz
Maximum Ratings
Storage Temperature	TS	-55	125
Operating Temperature	TA	-40	100
Average Input Current	IF(AVG)		25		mA
Peak Input Current (50% duty cycle, 1us pulse width)	IF(PEAK)		50		mA
Transient Input Current (Pulse width <1us, 300pps)	IF(TRAN)		1		A
Reverse Input Voltage (Pin 3-1)	VR		5		V
Average Output Current (Pin 5)	IO(AVG)		15		mA
Output Voltage (Pin 5-4)	VO	-0.5	30	V
Supply Voltage (Pin 6-4)	VCC	-0.5	30	V
Output Dissipation Power	PO		100		mW
Total Dissipation Power	PT		145		mW
Recommended Operating Conditions
Supply Voltage	VCC	4.5	30	V
Output Voltage	VO	0	30	V
Forward Input Current (ON)	IF(ON)	10	20	mA
Forward Input Voltage (OFF)	VF(OFF)	-5	0.8	V
Operating Temperature	TA	-40	100

Applications

IPM Isolation
IGBT/MOSFET Gate Isolation Drive
AC and Brushless DC Motor Drives
Industrial Inverters

Notes

Conventional electrostatic discharge (ESD) precautions are recommended when handling and assembling this device to prevent damage or degradation due to ESD.

2412021443_KTP-HCPL-M456-C5H0_C41379066.pdf

Wholesale Intelligent power module interface optocoupler KTP HCPL-M456-C5H0 for inverter efficiency improvement from china suppliers

Intelligent power module interface optocoupler KTP HCPL-M456-C5H0 for inverter efficiency improvement Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!